Product DescriptionRetrofit kit is designed to easily attach to the valve bonnet on select competitor valves utilizing Belimo LM and LF series actuators.
The UGLK/UGSP retrofit kit is designed to easily attach to the valve bonnet on select
competitor valves utilizing Belimo LM and LF series actuators. The kit
is used to restore service to the valve without removal of the valve, saving
The unique collar design allows the UGLK to be mounted on various two-way or threeway
valves. The rack and pinion construction allow the linkage to be used with
normally open and normally closed valves.
The actuator is sold separately from the linkage. This allows users to select the
actuator with the desired control signal. The linkage utilizes standard air-side actuators
that can be purchased at any time and mounted in the field. With the free spring
design of the linkage, clearance is not an issue. The linkage can be oriented at any
angle on the bonnet.
The UGLK/UGSP linkage provides approximately å?Û of downward stroke with 95å¡
rotation on the actuator. The linkage travel is based on the size of gear inside. The
gear size is stamped on the frame. This allows the valve to extend fully open or closed
based on signal. When directional needs vary, the actuator can be flipped or the
directional switch turned to a new rotation. The compact design allows for installation
in tight spaces.